Window Wall Series
High performance, in line with standards, high quality, reasonable design
inquiry
Window Wall Series
Product core selling points and technical compliance design **
1. Wind pressure resistance (AS 2047 core requirements) **
** Technical parameters **
The window wall system has passed the AS 2047 wind pressure test, can withstand up to 12 hurricanes (wind pressure rating of 4500Pa), and uses high-strength 6063-T5 aluminum alloy profiles, thickness from 2.0mm (far more than the common Australian market standard of 1.4mm).
Structural design: built-in reinforcement and multi-point locking system to ensure no deformation in extreme weather (deflection deformation value ≤L/300, L is the span).
2. Water tightness and air tightness (AS 2047 key indicators) **
- ** Technical highlights **
Water tightness: Through 150Pa~450Pa pressure spray test (AS 2047 highest grade), EPDM EPDM rubber strip + drainage chamber double safety design, the penetration in rainstorm < 0.01L/(m²·min).
Air tightness: The air permeability under 75Pa pressure difference is less than 1.5m³/(m·h), which is 70% higher than the Australian standard (non-air-conditioned room ≤5m³).
3. Energy saving and environmental protection certification
Low-E glass standard
Double insulating glass (6mm+12A+6mm), U value ≤1.8W/(m²·K), in line with the Australian BESS energy efficiency rating AAA.
Material sustainability
The aluminum is 100% recyclable and the production process is ISO 14001 certified to meet the requirements of the Australian Green Building Council (GBCA).
4. Modular quick installation
- Ergonomic advantage
- Unit preassembly design, site assembly efficiency increased by 50% (compared with traditional curtain wall), single standard unit (1.5m×3m) installation time ≤2 hours.
Trust construction and authoritative endorsement
1. Certification and test report
Compulsory certification
- AS 2047:2014 (Window Wall System Performance)
- AS 4420 series (wind pressure, water tightness, air tightness test)
2. Visual evidence chain
Lab test video
Stability of display window wall in wind tunnel simulation of level 12 wind pressure and storm spray test (marked AS 2047 test parameters).